17 Feb
2011
17 Feb
'11
10:23 p.m.
Hello,
I've recently installed Kubuntu10.10 on a laptop Acer TM660 (rather
old hardware now), running in 32b
with a Centrino chip for wireless connection but I didn't find how to
configure interfaces; in the
menu to configure the network I was able to put parameters for new
wireless connection but
surprisingly there is no option to bind connection with a specific
interface; thus, after that,
there is no mean to set up interface as it is not yet configurated;
command ifconfig -a gives:
eth0 Link encap:Ethernet HWaddr 00:c0:9f:2e:d9:bf
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10
eth1 Link encap:Ethernet HWaddr 00:04:23:77:53:2b
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10 Adresse de base:0xa000 Mémoire:e0206000-e0206fff
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:8784 (8.7 KB) Octets transmis:8784 (8.7 KB)
and content of file /etc/network/interfaces is only:
auto lo
iface lo inet loopback
Problem is not solved if i do following instructions:
iwconfig eth1 essid <my network name>
iwconfig eth1mode Managed
iwconfig eth1 rate auto
iwconfig eth1 key <myKey>
Any suggestion(s)?? Thanks in advance
Regards
17 Feb
17 Feb
10:45 p.m.
Hello,
Gilles Maria-Sube a écrit :
Hello,
I've recently installed Kubuntu10.10 on a laptop Acer TM660 (rather
old hardware now), running in 32b
with a Centrino chip for wireless connection but I didn't find how to
configure interfaces; in the
menu to configure the network I was able to put parameters for new
wireless connection but
surprisingly there is no option to bind connection with a specific
interface; thus, after that,
there is no mean to set up interface as it is not yet configurated;
command ifconfig -a gives:
do you have a wireless entry inside networkmanager icon near the clock ?
for my ubuntu 9.10: I just click on the icon with the left mouse button,
list show me available network mixing ethernet, wifi, 3g, ...
eth0 Link encap:Ethernet HWaddr
00:c0:9f:2e:d9:bf
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10
eth1 Link encap:Ethernet HWaddr 00:04:23:77:53:2b
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10 Adresse de base:0xa000 Mémoire:e0206000-e0206fff
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:8784 (8.7 KB) Octets transmis:8784 (8.7 KB)
and content of file /etc/network/interfaces is only:
auto lo
iface lo inet loopback
Problem is not solved if i do following instructions:
iwconfig eth1 essid <my network name>
iwconfig eth1mode Managed
iwconfig eth1 rate auto
iwconfig eth1 key <myKey>
Any suggestion(s)?? Thanks in advance
what is the result of:
sudo iwlist eth1 scan
if error message like:
eth1 Interface doesn't support scanning : Network is down
sudo ifconfig eth1 up
Regards
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
a+,
Laurent.
18 Feb
18 Feb
7:44 a.m.
2011/2/17 Laurent Bohnert <lab(a)plan-net.lu>lu>:
it gives:
eth1 Scan completed :
Cell 01 - Address: 00:18:39:AB:E0:4C
ESSID:"correia"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Quality:50 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 1296ms ago
Cell 02 - Address: 00:1F:3F:A4:19:41
ESSID:"MyWirelessAccess"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:72 Signal level:0 Noise level:0
Extra: Last beacon: 684ms ago
which is correct: MyWirelessAccess is my network
Hello,
Gilles Maria-Sube a écrit :
No i can't find any networkmanager, I suppose it is not present; many things
are absent (like data-base, mysql, etc...) I suppose it is to install
by internet...
Hello,
I've recently installed Kubuntu10.10 on a laptop Acer TM660 (rather
old hardware now), running in 32b
with a Centrino chip for wireless connection but I didn't find how to
configure interfaces; in the
menu to configure the network I was able to put parameters for new
wireless connection but
surprisingly there is no option to bind connection with a specific
interface; thus, after that,
there is no mean to set up interface as it is not yet configurated;
command ifconfig -a gives:
do you have a wireless entry inside networkmanager icon near the clock ?
for my ubuntu 9.10: I just click on the icon with the left mouse button,
list show me available network mixing ethernet, wifi, 3g, ...
That's the gnome version; I'm using KDE's one
eth0 Link encap:Ethernet HWaddr
00:c0:9f:2e:d9:bf
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10
eth1 Link encap:Ethernet HWaddr 00:04:23:77:53:2b
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10 Adresse de base:0xa000 Mémoire:e0206000-e0206fff
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:8784 (8.7 KB) Octets transmis:8784 (8.7 KB)
and content of file /etc/network/interfaces is only:
auto lo
iface lo inet loopback
Problem is not solved if i do following instructions:
iwconfig eth1 essid <my network name>
iwconfig eth1mode Managed
iwconfig eth1 rate auto
iwconfig eth1 key <myKey>
Any suggestion(s)?? Thanks in advance
what is the result of:
sudo iwlist eth1 scan
if error message like:
eth1 Interface doesn't support scanning : Network is down
sudo ifconfig eth1 up
nothing happens, and ping www.yahoo.com gives:
ping: unknown host www.yahoo.com
no network is available
Regards
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
a+,
Laurent.
8:58 a.m.
I have never used Kubuntu but everything seems fine to me. Your wireless
connection is up and running and it can see the avaliable networks.
Now, if you want to automatically connect to any given network you just have
to configure it. You can do that, either manually (check the Ubuntu
documentation, but most likely you will need to edit /etc/network/interfaces
and, as your network is encrypted you will probably also need to do a couple
of more things), or through your GUI network manager (I ignore what is the
default in Kubuntu, but probably there is some kind of plasma widget you can
install and/or add to the panel). If the Kubuntu widget is not working (I
have heard that KDE 4.x, x<6, is a bit buggy) and you prefer having some
kind of GUI to manage your network you can install the Gnome network manager
or Wicd.
Kind regards,
Miro
On Fri, Feb 18, 2011 at 8:44 AM, Gilles Maria-Sube <mgms62(a)gmail.com> wrote:
2011/2/17 Laurent Bohnert <lab(a)plan-net.lu>lu>:
it gives:
eth1 Scan completed :
Cell 01 - Address: 00:18:39:AB:E0:4C
ESSID:"correia"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Quality:50 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 1296ms ago
Cell 02 - Address: 00:1F:3F:A4:19:41
ESSID:"MyWirelessAccess"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:72 Signal level:0 Noise level:0
Extra: Last beacon: 684ms ago
which is correct: MyWirelessAccess is my network
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
--
http://www.edelmiromoman.eu/
Hello,
Gilles Maria-Sube a écrit :
No i can't find any networkmanager, I suppose it is not present; many
things
are absent (like data-base, mysql, etc...) I suppose it is to install
by internet...
Hello,
I've recently installed Kubuntu10.10 on a laptop Acer TM660 (rather
old hardware now), running in 32b
with a Centrino chip for wireless connection but I didn't find how to
configure interfaces; in the
menu to configure the network I was able to put parameters for new
wireless connection but
surprisingly there is no option to bind connection with a specific
interface; thus, after that,
there is no mean to set up interface as it is not yet configurated;
command ifconfig -a gives:
do you have a wireless entry inside networkmanager icon near the clock ?
for my ubuntu 9.10: I just click on the icon with the left mouse button,
list show me available network mixing ethernet, wifi, 3g, ...
That's the gnome version; I'm using KDE's one
eth0 Link encap:Ethernet HWaddr
00:c0:9f:2e:d9:bf
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10
eth1 Link encap:Ethernet HWaddr 00:04:23:77:53:2b
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10 Adresse de base:0xa000 Mémoire:e0206000-e0206fff
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:8784 (8.7 KB) Octets transmis:8784 (8.7 KB)
and content of file /etc/network/interfaces is only:
auto lo
iface lo inet loopback
Problem is not solved if i do following instructions:
iwconfig eth1 essid <my network name>
iwconfig eth1mode Managed
iwconfig eth1 rate auto
iwconfig eth1 key <myKey>
Any suggestion(s)?? Thanks in advance
what is the result of:
sudo iwlist eth1 scan
if error message like:
eth1 Interface doesn't support scanning : Network is down
sudo ifconfig eth1 up
nothing happens, and ping www.yahoo.com gives:
ping: unknown host www.yahoo.com
no network is available
Regards
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
a+,
Laurent.
20 Feb
20 Feb
1:28 a.m.
2011/2/18 Miro Moman <miromoman(a)gmail.com>om>:
I have never used Kubuntu but everything seems fine to
me. Your wireless
connection is up and running and it can see the avaliable networks.
Now, if you want to automatically connect to any given network you just have
to configure it. You can do that, either manually (check the Ubuntu
documentation, but most likely you will need to edit /etc/network/interfaces
and, as your network is encrypted you will probably also need to do a couple
of more things), or through your GUI network manager (I ignore what is the
default in Kubuntu, but probably there is some kind of plasma widget you can
install and/or add to the panel).
I don't find any usefull widget to add, there is a small icon near the
clock for connections
but there is no option to activate or deactivate any connection, it is
just indicated that
ethernet connection (eth0) and wireless connection (eth1) doesn't
work. After configuration
of eth1 with iwconfig, if I'm typing iwconfig I obtain:
lo no wireless extensions.
eth0 no wireless extensions.
eth1 unassociated ESSID:off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:16 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:3334-7A65-3435-615A-3433-6262-50 Security mode:open
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I'm surprised by Nickname:"ipw2100"......
If the Kubuntu widget is not working (I
have heard that KDE 4.x, x<6, is a bit buggy) and
you prefer having some
kind of GUI to manage your network you can install the Gnome network manager
or Wicd.
Yes but for that I need internet connection....:D
Ok I think I will leave Kubuntu10.10 at the moment and choose another
version who use either gnome
or a version of KDE less than KDE4...
Thank you for your help
Kind regards,
Miro
On Fri, Feb 18, 2011 at 8:44 AM, Gilles Maria-Sube <mgms62(a)gmail.com> wrote:
2011/2/17 Laurent Bohnert <lab(a)plan-net.lu>lu>:
it gives:
eth1 Scan completed :
Cell 01 - Address: 00:18:39:AB:E0:4C
ESSID:"correia"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Quality:50 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 1296ms ago
Cell 02 - Address: 00:1F:3F:A4:19:41
ESSID:"MyWirelessAccess"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:72 Signal level:0 Noise level:0
Extra: Last beacon: 684ms ago
which is correct: MyWirelessAccess is my network
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
--
http://www.edelmiromoman.eu/
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
Hello,
Gilles Maria-Sube a écrit :
No i can't find any networkmanager, I suppose it is not present; many
things
are absent (like data-base, mysql, etc...) I suppose it is to install
by internet...
Hello,
I've recently installed Kubuntu10.10 on a laptop Acer TM660 (rather
old hardware now), running in 32b
with a Centrino chip for wireless connection but I didn't find how to
configure interfaces; in the
menu to configure the network I was able to put parameters for new
wireless connection but
surprisingly there is no option to bind connection with a specific
interface; thus, after that,
there is no mean to set up interface as it is not yet configurated;
command ifconfig -a gives:
do you have a wireless entry inside networkmanager icon near the clock ?
for my ubuntu 9.10: I just click on the icon with the left mouse button,
list show me available network mixing ethernet, wifi, 3g, ...
That's the gnome version; I'm using KDE's one
eth0 Link encap:Ethernet HWaddr
00:c0:9f:2e:d9:bf
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10
eth1 Link encap:Ethernet HWaddr 00:04:23:77:53:2b
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:10 Adresse de base:0xa000
Mémoire:e0206000-e0206fff
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:8784 (8.7 KB) Octets transmis:8784 (8.7 KB)
and content of file /etc/network/interfaces is only:
auto lo
iface lo inet loopback
Problem is not solved if i do following instructions:
iwconfig eth1 essid <my network name>
iwconfig eth1mode Managed
iwconfig eth1 rate auto
iwconfig eth1 key <myKey>
Any suggestion(s)?? Thanks in advance
what is the result of:
sudo iwlist eth1 scan
if error message like:
eth1 Interface doesn't support scanning : Network is down
sudo ifconfig eth1 up
nothing happens, and ping www.yahoo.com gives:
ping: unknown host www.yahoo.com
no network is available
Regards
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
a+,
Laurent.
8:56 a.m.
OK. If you want to try manual configuration:
http://wiki.debian.org/WiFi/HowToUse
If, as I assume, all the relevant packages are already installed, the above
instructions should allow you to establish a wireless connection.
If any package is missing and you don't have any other means for connecting
to the internet such as an Ethernet cable, then trying a different
distribution, as you suggested, may be the best way to go.
If you really like KDE, you can try the KDE version of Linux Mint (which is
essentially Ubuntu pre-configured to work better out of the box):
http://blog.linuxmint.com/?p=1657
If you don't mind the Desktop environment,I would recommend you the regular
version of Linux Mint (with Gnome).
There is also a Linux Mint flavour based in Debian (Linux Mint Debian
Edition or LMDE) also with Gnome:
http://blog.linuxmint.com/?p=1604
I personally use plain Debian with LXDE, but I wouldn't recommend it if you
don't have a working Ethernet connection.
For beginners, I tend to recommend Mind. You can also have a look at:
http://distrowatch.com/search.php?category=Beginners&origin=All&bas…
Cheers,
Miro
On Sun, Feb 20, 2011 at 2:28 AM, Gilles Maria-Sube <mgms62(a)gmail.com> wrote:
2011/2/18 Miro Moman <miromoman(a)gmail.com>om>:
--
http://www.edelmiromoman.eu/
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
--
http://www.edelmiromoman.eu/
I have never used Kubuntu but everything seems
fine to me. Your wireless
connection is up and running and it can see the avaliable networks.
Now, if you want to automatically connect to any given network you just
have
to configure it. You can do that, either manually
(check the Ubuntu
documentation, but most likely you will need to edit
/etc/network/interfaces
and, as your network is encrypted you will
probably also need to do a
couple
of more things), or through your GUI network
manager (I ignore what is
the
default in Kubuntu, but probably there is some
kind of plasma widget you
can
install and/or add to the panel).
I don't find any usefull widget to add, there is a small icon near the
clock for connections
but there is no option to activate or deactivate any connection, it is
just indicated that
ethernet connection (eth0) and wireless connection (eth1) doesn't
work. After configuration
of eth1 with iwconfig, if I'm typing iwconfig I obtain:
lo no wireless extensions.
eth0 no wireless extensions.
eth1 unassociated ESSID:off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:16 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:3334-7A65-3435-615A-3433-6262-50 Security
mode:open
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I'm surprised by Nickname:"ipw2100"......
If the Kubuntu widget is not working (I
have heard that KDE 4.x, x<6, is a bit buggy)
and you prefer having some
kind of GUI to manage your network you can install the Gnome network
manager
or Wicd.
Yes but for that I need internet connection....:D
Ok I think I will leave Kubuntu10.10 at the moment and choose another
version who use either gnome
or a version of KDE less than KDE4...
Thank you for your help
Kind regards,
Miro
On Fri, Feb 18, 2011 at 8:44 AM, Gilles Maria-Sube <mgms62(a)gmail.com>
wrote:
>
> 2011/2/17 Laurent Bohnert <lab(a)plan-net.lu>lu>:
> >
> > Hello,
> >
> >
> >
> > Gilles Maria-Sube a écrit :
> >>
> >> Hello,
> >>
> >> I've recently installed Kubuntu10.10 on a laptop Acer TM660 (rather
> >> old hardware now), running in 32b
> >> with a Centrino chip for wireless connection but I didn't find how to
> >> configure interfaces; in the
> >> menu to configure the network I was able to put parameters for new
> >> wireless connection but
> >> surprisingly there is no option to bind connection with a specific
> >> interface; thus, after that,
> >> there is no mean to set up interface as it is not yet configurated;
> >> command ifconfig -a gives:
> >>
> >
> > do you have a wireless entry inside networkmanager icon near the clock
?
>
> No i can't find any networkmanager, I suppose it is not present; many
> things
> are absent (like data-base, mysql, etc...) I suppose it is to install
> by internet...
>
> >
> > for my ubuntu 9.10: I just click on the icon with the left mouse
button,
list show me available network mixing ethernet, wifi,
3g, ...
That's the gnome version; I'm using KDE's one
> eth0 Link encap:Ethernet HWaddr 00:c0:9f:2e:d9:bf
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 lg file transmission:1000
> Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
> Interruption:10
>
> eth1 Link encap:Ethernet HWaddr 00:04:23:77:53:2b
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 lg file transmission:1000
> Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
> Interruption:10 Adresse de base:0xa000
> Mémoire:e0206000-e0206fff
>
> lo Link encap:Boucle locale
> inet adr:127.0.0.1 Masque:255.0.0.0
> adr inet6: ::1/128 Scope:Hôte
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
> TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 lg file transmission:0
> Octets reçus:8784 (8.7 KB) Octets transmis:8784 (8.7 KB)
>
> and content of file /etc/network/interfaces is only:
>
> auto lo
> iface lo inet loopback
>
> Problem is not solved if i do following instructions:
>
> iwconfig eth1 essid <my network name>
> iwconfig eth1mode Managed
> iwconfig eth1 rate auto
> iwconfig eth1 key <myKey>
>
> Any suggestion(s)?? Thanks in advance
>
what is the result of:
sudo iwlist eth1 scan
it gives:
eth1 Scan completed :
Cell 01 - Address: 00:18:39:AB:E0:4C
ESSID:"correia"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Quality:50 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 1296ms ago
Cell 02 - Address: 00:1F:3F:A4:19:41
ESSID:"MyWirelessAccess"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:72 Signal level:0 Noise level:0
Extra: Last beacon: 684ms ago
which is correct: MyWirelessAccess is my network
if error message like:
eth1 Interface doesn't support scanning : Network is down
sudo ifconfig eth1 up
nothing happens, and ping www.yahoo.com gives:
ping: unknown host www.yahoo.com
no network is available
> Regards
> _______________________________________________
> Lilux-help mailing list
> Lilux-help(a)lilux.lu
> http://lilux.lu/mailman/listinfo/lilux-help
>
a+,
Laurent.
_______________________________________________
Lilux-help mailing list
Lilux-help(a)lilux.lu
http://lilux.lu/mailman/listinfo/lilux-help
4857
days inactive
4860
days old
5 comments
3 participants
participants (3)
-
Gilles Maria-Sube -
Laurent Bohnert -
Miro Moman